- Caldari
- Posts : 23
Join date : 2018-09-25
Re: New Pulley_HTD-3M-21T
Sun Oct 07, 2018 9:09 am
host is bad trying to install .exe files upload some other place
- Funky
- Posts : 13
Join date : 2018-09-12
Re: New Pulley_HTD-3M-21T
Sun Oct 07, 2018 10:40 am
Oh Ok,
didnt know that, i have uploaded it on a other place
didnt know that, i have uploaded it on a other place
Re: New Pulley_HTD-3M-21T
Mon Oct 08, 2018 9:59 pm
Hey Funky
This is a really nice upgrade, however, it could turn little nasty for low quality printers (like mine)
I was gonna use two part epoxy to glue my pulley wheels onto the original gears, but found out that just a press fit was good enough even for the upgraded (hacked) mobo..
Anyway, we can include these amongst the files If you don't mind. I will have to mention the printer resolution capabilities though..
Regards
Jay
This is a really nice upgrade, however, it could turn little nasty for low quality printers (like mine)
I was gonna use two part epoxy to glue my pulley wheels onto the original gears, but found out that just a press fit was good enough even for the upgraded (hacked) mobo..
Anyway, we can include these amongst the files If you don't mind. I will have to mention the printer resolution capabilities though..
Regards
Jay
- Funky
- Posts : 13
Join date : 2018-09-12
Re: New Pulley_HTD-3M-21T
Tue Oct 09, 2018 6:08 am
Hey Jay,
No problem u can use it for the project, thats why i posted it
No problem u can use it for the project, thats why i posted it
- Caldari
- Posts : 23
Join date : 2018-09-25
Re: New Pulley_HTD-3M-21T
Tue Oct 09, 2018 8:01 am
i think main problem is bbcs body is so tiny so i extrude body inside and now is just perfect, tested this file you posted and my printer to didnt print well
There is trick to print 3-4 same time bcs when printer come back to print plastic is already cold, when you print 1 pcs than is plastic stil hot and is hard to print good small parts _)
There is trick to print 3-4 same time bcs when printer come back to print plastic is already cold, when you print 1 pcs than is plastic stil hot and is hard to print good small parts _)
- Funky
- Posts : 13
Join date : 2018-09-12
Re: New Pulley_HTD-3M-21T
Tue Oct 09, 2018 8:23 am
I print it on my Anycubic i3 mega, its still perfect printed.
When i am at home i can post my settings for the print.
When i am at home i can post my settings for the print.
Permissions in this forum:
You cannot reply to topics in this forum
|
|