Home
Latest images
Search
Register
Log in
zougarou- Posts : 1
Join date : 2021-03-31
Age : 59
flap operation
Wed Mar 31, 2021 8:18 am
Hi,
i printed the flap module, wired and programmed as expected and it looks great and works fine. The problem is that I only have 2 states in windows or in mfs2020 because the switch is an "on / off / on". I don't know how to have 3 states: 0, middle and full.
Thanks for your help.
i printed the flap module, wired and programmed as expected and it looks great and works fine. The problem is that I only have 2 states in windows or in mfs2020 because the switch is an "on / off / on". I don't know how to have 3 states: 0, middle and full.
Thanks for your help.
- SergeyPe
- Posts : 15
Join date : 2018-02-09
Re: flap operation
Fri Apr 02, 2021 10:00 am
Hi,
You'll need to use an FSUIPC program which offers a lot of flexibilty in the hardware- simulator interface. There you will be able to assign every position of your switch (including OFF) to a desired state of flaps. I'm not 100% sure, but it should be possible even with a free version of FSUIPC.
You'll need to use an FSUIPC program which offers a lot of flexibilty in the hardware- simulator interface. There you will be able to assign every position of your switch (including OFF) to a desired state of flaps. I'm not 100% sure, but it should be possible even with a free version of FSUIPC.
Permissions in this forum:
You cannot reply to topics in this forum|
|
|