Connecting to Yoke via electronic

Hello,

after I saw this project on youtube I am excited to get this working in my Pit. Best case is to have to Yokes which could be "wired" together.

regards Christian

Hi again

This is actually good idea. I can't think of any way how to do this by "wiring" two yokes together but there must be a way to do this via software.
Having two yokes plugged in independently and little program dealing with "follow mode". You would only need to press button of the "master" yoke in use to select it as primary controller.

Jay

This is the solution I would like - but we need a software programmer

Christian

Indeed we need..     Anybody OUT THERE?

Hi Jay. I am finding this site amazing. I have been away from FS for a few years and have decided to get back into it. I have made a cnc and 3d printer so I am now ready to spread my wings (so to speak). I have just made the main B58 panels and shall be 3d printing the bezels. I am very interested in your FFB Yoke. I would believe that you should be able to run 2 yokes over one usb connection connected in parallel. Each yoke has its own power supply but the usb connection is piggy backed, therefor both yokes would work at the same time. Hmm, food for thought.

regards,

Chris

Hi Chris

Well let's say it would be possible to connect two yokes in parallel, you still don't get "follow" mode from one to another without additional software..

Bummer! back to the drawing board.